Seylora

Round sapphires

A round sapphire is cut as a circular brilliant, the most symmetrical outline the gem can take and the hardest to cut without losing weight. The stones on this page come from reviewed suppliers in Sri Lanka, each listed with its diameter, weight, color and stated treatment.

19 listed · 0.43 to 7.08 ct5 with videoTrade access
Filters (0)
Carat weight
Custom range
Reset
0.56 ct  sapphireAvailable
0.56 ct Peach Sapphire
Round5.10 × 5.09 mmSri Lanka
Heated · supplier-reported
7.08 ct  sapphireAvailable
7.08 ct Green Sapphire
Round11.47 × 11.46 mmMadagascar
Heated · supplier-reported
1.02 ct  sapphireNot available
1.02 ct Blue Sapphire
Round6.05 × 5.97 mmSri Lanka
Heated · supplier-reported
1.74 ct  sapphireAvailable
1.74 ct Yellow Sapphire
Round6.82 × 6.77 mmSri Lanka
Unheated · supplier-reported
1.16 ct  sapphireAvailable
1.16 ct Blue Sapphire
Round6.71 × 6.44 mmSri Lanka
Heated · supplier-reported
2.93 ct  sapphireAvailable
2.93 ct Yellow Sapphire
Round7.87 × 7.85 mmSri Lanka
Unheated · supplier-reported
4.93 ct  sapphireAvailable
4.93 ct Yellow Sapphire
Round8.92 × 8.88 mmSri Lanka
Heated · supplier-reported
0.45 ct  sapphireAvailable
0.45 ct Blue Sapphire
Round4.48 × 4.45 mmSri Lanka
Heated · supplier-reported
0.43 ct  sapphireAvailable
0.43 ct Blue Sapphire
Round4.59 × 4.57 mmSri Lanka
Heated · supplier-reported
3.04 ct  sapphireAvailable
3.04 ct Blue Sapphire
Round8.45 × 8.39 mmSri Lanka
Heated · supplier-reported
0.56 ct  sapphireAvailable
0.56 ct Yellow Sapphire
Round4.99 × 4.97 mmSri Lanka
Heated · supplier-reported
1.01 ct  sapphireAvailable
1.01 ct Teal Sapphire
Round5.46 × 5.34 mmMadagascar
Heated · supplier-reported
1.01 ct  sapphireAvailable
1.01 ct Teal Sapphire
Round5.91 × 5.90 mmMadagascar
Unheated · supplier-reported
1.57 ct  sapphireAvailable
1.57 ct Blue Sapphire
Round7.11 × 7.11 mmSri Lanka
Heated · supplier-reported
1.56 ct  sapphireAvailable
1.56 ct Blue Sapphire
Round6.44 × 6.42 mmSri Lanka
Heated · supplier-reported
1.69 ct  sapphireAvailable
1.69 ct Blue Sapphire
Round6.51 × 6.50 mmSri Lanka
Heated · supplier-reported
1.17 ct  sapphireAvailable
1.17 ct Blue Sapphire
Round6.16 × 6.04 mmSri Lanka
Heated · supplier-reported
1.29 ct  sapphireAvailable
1.29 ct Blue Sapphire
Round6.30 × 6.27 mmSri Lanka
Heated · supplier-reported
1.28 ct  sapphireAvailable
1.28 ct Blue Sapphire
Round6.47 × 6.44 mmSri Lanka
Heated · supplier-reported

Trade prices are shown to approved retail accounts. Sign in or apply.

Round sapphires at a glance

OutlineCircular, usually with a brilliant facet pattern
Approximate sizeAbout 6 mm across at 1 ct, 7.5 mm at 2 ct, 8.5 mm at 3 ct
Yield from roughLower than an oval or cushion cut from the same crystal
StrengthsEven brilliance, no bow tie, the easiest shape to pair
Watch forWindowing in shallow stones, extra depth below the girdle
Common settingsStuds, solitaires, halos, accent and side stones

What is listed right now

Right now the catalog holds 19 round sapphires, from 0.43 to 7.08 ct, and 18 are available to reserve. The most common colors are blue, yellow, teal. By the suppliers' own statements, 16 are heated and 3 unheated. 5 listings include a video.

By color: Blue (11), Yellow (4), Teal (2), Peach (1), Green (1).

What makes rounds scarcer

A sapphire crystal is rarely as wide as it is long, so turning it into a circle means grinding away the ends. Yield for any faceted corundum is modest, and a round usually costs noticeably more weight than an oval cut from the same piece of rough. With the material sold by the carat, most cutters choose the outline that saves weight unless the crystal is already short and stubby.

That is why a fine round usually carries a higher price per carat than an oval of the same color and clarity, and why calibrated rounds above a couple of carats are hard to collect in matching sets. Small rounds, by contrast, are cut in large numbers for accent and pavé work.

Brilliance, symmetry and no bow tie

Because every side is the same distance from the center, a well cut round returns light evenly and shows no bow tie. That makes it the most forgiving outline for strongly colored material, which can look dark in elongated cuts. Rounds also sparkle well in small sizes, which is why studs and halos use them.

The trade off is that symmetry exposes poor cutting. An off center culet, a wavy girdle or a lopsided table is easy to spot. Check the top view photo for an evenly spaced star pattern and a table centered in the outline.

Diameter, depth and how big a round looks

Sapphire weighs about 13 percent more than diamond for the same volume, so rounds face up smaller per carat. A typical 1 ct stone measures close to 6 mm across, a 2 ct stone about 7.5 mm and a 3 ct stone about 8.5 mm. Deep native cuts can weigh the same with a diameter half a millimeter or more smaller.

Compare the listed diameter with the weight. If a 1.20 ct round is only 5.6 mm wide, much of the weight sits under the girdle and the gem will need a taller setting. Shallow stones have the opposite problem and may show a window through the center.

Rounds for matched pairs and studs

Earrings and three stone designs need stones that match in diameter, color and tone. Circles are the easiest outline to pair because there is no ratio to match, only size and color. When pairing, look for stones from the same supplier and compare them side by side on video under the same light.

For studs, a diameter difference of a tenth of a millimeter is invisible once set, but a difference in tone is not. Reserve a few candidates at once and release the ones that do not match.

Color, treatment and documentation

The rounds on this page cover the colors suppliers have listed, from blue to yellow, pink and teal. Each listing states the treatment and marks it lab documented only when a laboratory report is attached.

If you plan to sell a round as unheated, buy one with a report. Heat treatment cannot be confirmed or ruled out without laboratory testing, and customers buying a center stone increasingly ask to see the paperwork.

Native rounds and precision cut rounds

Sri Lankan workshops cut rounds two ways. Native rounds are shaped by eye on a hand driven wheel to save weight, so the outline may be slightly out of round and the pavilion deeper than ideal. Precision rounds are cut on machines to set angles, with an even outline and a calibrated diameter that drops straight into a ready made mounting.

Both have a place. Native stones often cost less per carat and can show lovely color, while precision stones save setting time and suit production lines. The listing photos and measurements usually make the difference clear: a precision round lists two diameters within a few hundredths of each other.

Questions buyers ask

How many round sapphires are available?

19 loose rounds are listed now, ranging from 0.43 to 7.08 ct. Use the filters for color, treatment and carat level.

What size is a 1 carat round sapphire?

Close to 6 mm in diameter for a well proportioned stone. A 1 ct round diamond is about 6.5 mm, so the sapphire looks a little smaller for the same weight.

Why do round sapphires cost more per carat?

Cutting a circle from an elongated crystal loses more weight than cutting an oval or cushion, so each remaining carat costs more. Larger matched rounds are also less common.

Are rounds good for engagement rings?

Sapphire is 9 on the Mohs scale, hard enough for daily wear, and a round center shows even color without a bow tie. Choose a setting that protects the girdle, such as four or six prongs or a bezel.

What diameter is a 2 carat round sapphire?

About 7.5 mm for a stone of normal depth. Native cuts of the same weight can measure closer to 7 mm because more of the weight sits below the girdle.