Marquise sapphires at a glance
| Outline | Elongated with two points, also called navette |
|---|---|
| Typical ratio | Length to width of about 1.75 to 2.25 |
| Face-up size | Looks large for its weight because of its length |
| Watch for | Bow tie, uneven wings, chipped or thin points |
| Protect | Both points, with V prongs or a bezel |
| Common uses | Rings, east-west settings, clusters, earrings |
What is listed right now
Right now the catalog holds 2 marquise sapphires, from 0.46 to 0.87 ct, and 2 are available to reserve. The most common colors are blue. By the suppliers' own statements, 2 are heated and 0 unheated.
By color: Blue (2).
Why a marquise looks bigger
A marquise spreads its weight along a long axis, so it covers more of the finger than an oval or round of the same carat weight. For sapphire, which already faces up smaller than diamond per carat, that is a useful way to give a design presence without moving up to a heavier, costlier stone.
The shape follows long, narrow rough, so it can also save weight at the cutting stage. Even so, navettes are cut in smaller numbers than ovals, and fewer appear in any catalog.
Ratio and the wings
Most buyers prefer a ratio near 2.00. Shorter stones look plump, longer ones look needle thin. The curves on each side, called wings, should be even and gently rounded. Flat wings make the outline look boxy; uneven wings make it look bent once set.
Fold the outline in half lengthwise and crosswise in your mind. A good stone matches itself both ways, and its points line up on the same axis.
Bow tie and color
This cut almost always shows some bow tie across its width. In sapphire, how strong it looks depends on color depth and pavilion angles. Light and medium tones keep the effect mild; very dark blues can show a heavy band. Use the video to judge it in motion.
Color also concentrates toward the points, where the pavilion is steep, which can make the ends look darker than the center.
Setting the points
Two points mean two places to chip. V prongs or a bezel at each end protect them. Before setting, have the jeweler check both tips under magnification; the listing photos usually show if one has been knocked.
Marquises suit solitaires set north to south, east-west settings and clusters with other shapes. Small ones work well as side stones to a round or oval center.
Treatment and reports
Each listing gives the treatment as heated, unheated or another stated process, marked lab documented only when a laboratory report is attached. Without a report, the value is the supplier's statement.
Ask the team if you need more photos of the points or the side profile before you reserve.
Sizes in millimeters
A well proportioned 1 ct marquise measures roughly 10 by 5 mm, and a stone close to 2 ct roughly 12 by 6 mm. Compare that with a 1 ct round at about 6 mm across and the appeal is clear: the long outline covers far more of the finger for the weight.
Depth and ratio change these figures. A plump stone with a ratio near 1.7 will be shorter and wider; a slim one near 2.2 longer and narrower. Read both measurements on the listing, not only the weight.
A shape with a courtly past
Trade lore ties the name to the eighteenth century French court, and the outline has moved in and out of fashion ever since. It was a favorite of vintage cluster rings and returns whenever designers want a long, elegant line.
In sapphire the shape has a particular use: it lets a blue or yellow stone read as larger and more slender than its weight suggests, which suits contemporary rings set north to south or across the finger.
Small marquises in designs
Small navette stones are workhorses in jewelry design. Set in pairs beside a round or oval center, they draw the eye outward; arranged in a ring of six or eight, they form a flower; lined up end to end, they make a leaf or a sweeping band.
For this kind of work, matching color matters more than size, and stones from one supplier's parcel usually match best. Reserve them together and compare them in a single video if you can.
Questions buyers ask
How many marquise sapphires are listed?
2 loose navette cut stones are listed at the moment, from 0.46 to 0.87 ct.
Is a marquise sapphire the same as a navette?
Yes. Navette, French for little boat, is another name for the marquise outline: a long brilliant with a point at each end.
Does a marquise look bigger than an oval?
For the same weight, usually yes. Its length gives it more face-up coverage, which is useful in a dense gem like sapphire.
How do you protect the points of a marquise?
Set each point under a V prong or inside a bezel, and check the tips under magnification before setting. Thin points are the most common source of chips.
What ratio is best for a marquise sapphire?
Most buyers like a ratio around 1.85 to 2.10. Below that the stone looks plump; above it the stone looks very slender and the points become more fragile.


