Seylora

Princess cut sapphires

A princess cut sapphire is a square brilliant with sharp, pointed corners and a pavilion faceted like an inverted pyramid. The stones listed here come from reviewed suppliers in Sri Lanka, with weight, measurements, color and stated treatment.

1 listed · 1.10 to 1.10 ctTrade access
Filters (0)
Carat weight
Custom range
Reset

Trade prices are shown to approved retail accounts. Sign in or apply.

Princess cut sapphires at a glance

OutlineSquare with four pointed corners
Typical ratio1.00 to 1.05 for a true square
Facet styleBrilliant, with chevron facets on the pavilion
StrengthsCrisp modern outline, good sparkle, sets neatly in rows
Watch forChipped corners, uneven sides, extra depth
ProtectAll four corners, with V prongs or a bezel

What is listed right now

Right now the catalog holds 1 princess cut sapphire of 1.10 ct, and 1 is available to reserve. Its color is green. By the suppliers' own statements, 1 is heated and 0 unheated.

By color: Green (1).

A modern square for colored stones

The princess cut was developed for diamonds in the late twentieth century and has since been adapted to sapphire. It suits calibrated work, where square stones sit edge to edge in channel settings, bands and invisible settings, as much as single center stones.

Large stones in this cut are uncommon. The shape needs square rough and costs weight at the corners, so most are cut in small calibrated sizes. Single stones over a carat are worth noting when they appear.

Corners and durability

Sapphire is hard, 9 on the Mohs scale, but sharp corners are still the weakest point of any gem. A knock on a corner can chip it. Always set this cut with the corners covered by V prongs or a bezel, and check them under magnification before setting.

If a design will see heavy wear, a radiant or cushion offers a similar square look with clipped or rounded corners that are less exposed.

Proportions and face-up appearance

A true princess is square within a few hundredths of a millimeter. Compare listed length and width. Depth matters too: deep stones carry weight below the girdle and face up small, while shallow ones can show a window.

Under the table, a good stone shows an even X or cross pattern of reflections. Uneven patterns point to off center facets.

Color and treatment

Square brilliants show color crisply and work well for blue, pink and yellow sapphires in calibrated runs. Matching tone across several stones matters more than the exact shade of any single one.

Every listing states its treatment and marks it lab documented when a laboratory report is attached. Without a report, the value is the supplier's statement.

Calibrated squares for channel and invisible settings

Much of the demand for square sapphires comes from production work: eternity bands, channel set rows and invisible set panels, where stones sit side by side with no metal between them. These designs need stones cut to exact sizes, often in steps of a quarter millimeter, with matching depth so the table line stays flat.

Color matching across a run matters as much as size. A single stone that is a shade lighter breaks the line. When sourcing a run, ask for stones from one parcel and compare them together under the same light before setting.

Princess, radiant or cushion: choosing a square

All three give a square face, but they behave differently. A princess has the sharpest, most modern outline and the brightest sparkle of the three, at the cost of exposed corners. A radiant trims those corners, keeps much of the sparkle and wears better. A cushion rounds them off, often shows the richest color and suits vintage designs.

For a ring worn every day, a radiant or cushion is the safer pick. For pendants, earrings and channel work, where the corners are protected or rarely knocked, a princess gives the crispest look.

Size guide

A 1 ct stone of normal depth measures roughly 5.5 mm square. That is smaller than a 1 ct round of about 6 mm, because the square carries more of its weight in the corners and the pavilion. A 2 ct stone sits close to 7 mm square.

Deep stones weigh more for their size, so read the listed measurements before you choose a mounting.

Questions buyers ask

How many princess cut sapphires are listed?

1 loose princess cut stones are listed now, from 1.10 to 1.10 ct.

Are princess cut sapphires rare?

They are less common than ovals, cushions or rounds, especially above one carat, because the shape needs square rough and loses weight at the corners.

How should a princess cut stone be set?

With all four corners protected by V prongs or a bezel. The pointed corners are the most likely place to chip.

What size is a 1 carat princess cut sapphire?

Roughly 5.5 mm square for a stone of normal depth. Deeper stones of the same weight measure less across.

Is a princess cut a good engagement ring center?

It can be, provided the corners are protected by V prongs or a bezel. For a ring worn every day, many buyers choose a radiant or cushion instead, which give a similar square look with less exposed corners.

What is the difference between a princess and a radiant cut?

Both are square brilliants, but a princess has sharp pointed corners while a radiant has its corners trimmed. The radiant is more durable; the princess has the crisper outline.