Emerald cut sapphires at a glance
| Outline | Rectangle or square with beveled corners |
|---|---|
| Facet style | Step cut: rows of long facets parallel to the girdle |
| Also listed as | Octagon, octagonal step cut |
| Look | Broad flashes of color rather than scattered sparkle |
| Watch for | Visible inclusions and color zoning, a dark or open center |
| Common settings | Solitaire and three stone rings, east-west settings, pendants |
What is listed right now
Right now the catalog holds 7 emerald cut sapphires, from 0.62 to 16.00 ct, and 7 are available to reserve. The most common colors are bi-color, peach, green. By the suppliers' own statements, 6 are heated and 1 unheated. 3 listings include a video.
By color: Bi-color (1), Peach (1), Green (1), Teal (1), Padparadscha (1), Blue (1).
What a step cut shows
Stepped facets work like a set of mirrors arranged in rows. Instead of the many small flashes of a brilliant, they show wide planes of color and a hall of mirrors effect as the stone moves. In sapphire that look is calm and architectural, and it lets a saturated blue or yellow read as one even color.
The same openness that shows color also shows what is inside. Inclusions, silk and color zoning are easier to see through a large table, so this cut is usually reserved for cleaner rough. Expect fewer of these stones in any parcel than ovals or cushions.
Emerald cut and octagon: the same family
Suppliers in Sri Lanka often write octagon for a rectangle or square with its four corners cut off, faceted in steps. In the wider trade that outline is sold as an emerald cut, named after the gem it was developed for. This page includes both labels so buyers see every stone of the family in one place.
Check the listing photos to tell the variations apart. Some octagons have a brilliant style pavilion under a stepped crown, which adds sparkle and moves them closer to a radiant. For the classic look, check for straight, parallel facet rows through the whole stone.
Ratio and proportions
A classic rectangular stone sits around 1.30 to 1.50 length to width, while square versions, sometimes called Asscher style, sit near 1.00. Long, slim stones suit east-west settings and bands; squarer stones suit solitaires.
These stones can look glassy if they are too shallow, with a window that shows the finger through the center. Cut too deep, the gem looks dark and smaller than its weight. Compare the listed face-up size with the weight to judge where a stone sits.
Choosing color for a step cut
Medium tones with strong saturation suit the cut best. Pale stones can look washed out because stepped facets return less scattered light, and very dark stones can close up in the center. Yellow and lighter blue sapphires are often cut this way for that reason.
Color zoning, common in Sri Lankan material, is easier to see through long, open facets. Look at the face-up photo for bands of lighter and darker color running across the stone.
Treatment and documentation
Each listing states its treatment and marks it lab documented only when a laboratory report is attached. Clean, well colored stones of this cut are often the ones that justify a report, especially when they are sold as unheated.
If a report is not attached, the treatment shown is the supplier's statement. Ask the team if you need a stone tested before you commit.
Weight, size and the corners
The cut corners and straight sides hold more material than a curved outline, so an emerald cut often weighs more than an oval with the same length and width. A 7 by 5 mm stone of this kind commonly weighs a little over a carat, where a 7 by 5 mm oval sits close to one. Read listings by measurement when a mounting is fixed.
The clipped corners are there for a reason. They remove the sharp points of a plain rectangle, which would chip easily, and give the setter a flat edge to hold with a prong or a bezel.
Settings that suit the outline
Four corner prongs or a full bezel follow the outline cleanly. Three stone rings pair a rectangular center with tapered baguettes or smaller step cuts on either side, keeping the architectural look. East-west settings, with the long axis across the finger, suit slimmer stones and modern designs.
Because the open table shows the inside of the stone, avoid settings that put a prong or a gallery directly under it, where it can show through as a dark spot.
Questions buyers ask
How many emerald cut sapphires are listed?
7 loose emerald cut and octagon stones are listed now, from 0.62 to 16.00 ct.
Is an octagon sapphire the same as an emerald cut?
In most listings, yes. Octagon is a common supplier name for a step cut rectangle or square with cut corners, which the trade calls an emerald cut. Some octagons use a brilliant pavilion, so check the photos.
Do emerald cut sapphires show more inclusions?
They can. The large table and long facets make inclusions and color zoning easier to see than in a brilliant cut, so the cut is usually given to cleaner material.
Is an emerald cut sapphire less sparkly?
It shows a different kind of light: broad flashes and a hall of mirrors effect instead of many small sparkles. Many buyers choose it for that calm, even color.
What is an Asscher cut sapphire?
A square version of the emerald cut, with deeper corners and a high crown that give a concentric, windmill like pattern. Suppliers usually list such stones as emerald or octagon, so they appear on this page.
